Ever wondered what the difference is, and why? we take a look at the different products used in Held gear..
Leather
The traditional ‘go-to’ material for motorcyclists. While often not as practical or adaptable as textiles, leather still leads the way in abrasion resistance and, with the right care, is extremely durable. Leather garments should be fitted as tight as possible in order to firmly hold protectors in place. With wear, leather garments ‘break in’ and mould to the body. Held Rider Equipment uses the finest cowhide as standard, as well as kangaroo, goat, hairsheep and stingray leather in certain applications.
 |
| Held Street II Jacket- premium cowhide |
TFL COOL™ leather
Revolutionary treatment for black leather which helps it reflect solar radiation in the same way that white leather would, keeping the surface up to 20°C cooler and the wearer up to 12°C cooler, without the impracticality of wearing light colours.
 |
| TFL Cool leather on the left, not on the right! |
Pittards leather
The hairsheep is a cross between a sheep and a goat only found in the mountains of some African countries. Its hide is soft and comfortable, like goatskin, but it has a more dense – and therefore hard wearing – structure which is ideal for glove making. Pittards are the leading producer of high-grade hairsheep leather. Moisture will cause normal leather to go hard, crack and shrink. We soaked two gloves in chemical sweat for 24 hours. The Pittards WR100 hairsheep hide glove was still very soft when compared to the cowhide glove of the same thickness. Plus it is also up to 30% more resistant to tearing and abrasion.
 |
| Held gloves with Pittard leather back |
Kangaroo hide
Of the 48 species of kangaroo, many are protected. However the unchecked reproduction of largest breed has resulted in massive over-population and culls are therefore carried out under the supervision of the Australian government. Fortunately for motorcyclists, the hides make excellent rider equipment.
 |
| Held Slade leather suit- with mix of Kangaroo and cowhide, with Titanium inserts! |
Kangaroo hide is far more abrasion resistant than cowhide of the same thickness. This is because, unlike cows, kangaroos only sweat through their tail and therefore there are no pores in the hide. Kangaroo garments can therefore be lighter and provide more ‘feel’. Special tanning and drying methods mean kangaroo hide is resistant to moisture and so is less likely to loose its shape or degrade over time.
Stingray skin
The most abrasion resistant material that is pliant enough to be used in the manufacture of gloves. Selected styles of Held gloves feature Stingray protection on the ball of thumb, knuckles and wrist, backed with shock absorbing gel pads in order to allow fallen riders to slide more easily with less chance of fractured limbs cause by rolling.When exposed to a 10 Newton load on an H22 friction wheel at Pirmasens testing Institute in accordance with DIN 53754, Kangaroo leather wore though after 4,000 revolutions, while stingray skin withstood a 20,000 revolutions.
 |
| Held Titan gloves- Stingray leather covered Carbon shell side & finger protection |
For more information on Held in the UK, or to find your nearest dealer please visit www.held-uk.co.uk
No comments:
Post a Comment